Construction Site Safety Inspection Report

What goes in it

Every site safety inspection report from ReportDraft follows the same professional structure, so clients and reviewers find things where they expect them.

• Site access, housekeeping and storageDebris, scrap lumber with nails and combustible scrap cleared from work areas and stairs, Access routes, walkways and stairways clear and safe, Site perimeter, fencing, gates and warning signs, Materials stacked stable and kept back from edges and openings, Protruding rebar capped or guarded against impalement
• Fall protection and openingsOpen sides and edges protected by guardrails, nets or fall arrest, Floor holes, openings and skylights covered or guarded and marked, Harnesses, lanyards and anchors inspected before use and worn where needed, Roof work: guardrails, warning lines, nets or fall arrest in use
• Scaffolds and aerial liftsScaffolds inspected by a competent person before the shift (tag or record), Scaffold fully planked, with guardrails, base plates or mudsills, ties and safe access, Aerial and scissor lifts: pre-use check, gates closed, operators tied off in boom lifts
• LaddersLadders free of damage; defective ladders tagged Do Not Use and removed, Ladders set up correctly: extended above the landing or secured, on firm footing
• Excavations and trenchesExcavations inspected daily by a competent person, and after rain, Cave-in protection (sloping, shoring or a trench box) in place where needed, Spoils and equipment kept back from the edge; a ladder or ramp close by to get out, Underground utilities located and marked before digging
• Electrical and temporary powerGround fault protection (GFCI) or an assured grounding program on temporary power, Cords and plugs undamaged, ground pins present, kept out of water and traffic, Panels covered and labelled; no exposed live parts, Overhead power lines identified and kept clear of equipment and ladders
• Cranes, heavy equipment and vehiclesCranes inspected each shift by a competent person; rigging and slings in good condition, Swing radius barricaded; backup alarms working or a spotter used, Equipment run only by trained, authorized operators; seat belts used
• Tools and machine guardsGuards on saws and grinders in place and working, Damaged or noncompliant tools tagged out or removed, Powder-actuated tools and nail guns used by trained workers
• Fire prevention and hazardous materialsFire extinguishers on site, charged and within reach, Fuel, propane and flammables stored and labelled safely, Hot work: area cleared of combustibles, extinguisher and fire watch where needed, Chemical containers labelled; safety data sheets available; dust controlled when cutting
• Personal protective equipmentHard hats worn where there is a risk of falling or flying objects, Eye and face protection worn for cutting, grinding, nailing and chemicals, High-visibility vests, hearing protection, gloves and footwear suited to the work
• First aid, emergency and site facilitiesFirst aid kit stocked and a trained first aider on site when no clinic is close by, Emergency numbers, site address and plan posted; everyone knows the muster point, Toilets, drinking water and hand washing available
• Corrective actionsHazard and location, Corrective action, Responsible, Due, Status
• Items from earlier inspectionsItems from earlier inspections or reports, and whether each has been fixed.

How it works

1. Add your notes. Type or paste what you saw. Rate items with one tap if you like.

2. Get a draft. Findings, recommendations and a summary are written for you, in your report's structure.

3. Check, sign, send. A completeness list shows anything missing. Sign to lock the PDF and download Word too.

Why it pays for itself

Site safety inspection report rules by province

The key rule in each province or territory, linked to the official text. Each guide lists every rule with its sources, and each template is set up for that province or territory. Last reviewed October 12, 2026.